0340 – 62 07 64
en_GB English (UK)
en_GB English (UK) sv_SE Svenska da_DK Dansk nb_NO Norsk bokmål fi Suomi is_IS Íslenska

Quality plan

Control plan and functional checks

Here you document that your Giha floor system has been installed according to current instructions. By completing the inspection plan, we will ensure the highest quality, correct functionality, and that extensive guarantees and insurance are activated for the project together.

Controller name(Required)

Complete the checkpoints below:

1. Goods inwards check to ensure: delivery matches the delivery note, no materials are damaged during transit, materials have been stored covered or indoors.(Required)
1. Goods inwards check to ensure: delivery matches the delivery note, no materials are damaged during transit, materials have been stored covered or indoors.
2. Check the base for the correct type of fastening.(Required)
2. Check the base for the correct type of fastening.
3. Additional reinforcements at doors and point loads have been made.(Required)
3. Additional reinforcements at doors and point loads have been made.
4. Movement joints correctly made.(Required)
4. Movement joints correctly made.
5. The sealing of the floor-to-wall angle (concrete slab – wall) has been carefully carried out.(Required)
5. The sealing of the floor-to-wall angle (concrete slab – wall) has been carefully carried out.
6. Any openings in the concrete slab have been sealed and checked. Checked with a smoke pen under negative pressure inside relative to outside.(Required)
6. Any openings in the concrete slab have been sealed and checked. Checked with a smoke pen under negative pressure inside relative to outside.
7. The concrete slab to be thoroughly vacuumed of organic material. Visual inspection.(Required)
7. The concrete slab to be thoroughly vacuumed of organic material. Visual inspection.
8. No airtightness issues in the ventilation ducting. (joints, end caps, take-offs, etc.) Checked with smoke with fan connected.(Required)
8. No airtightness issues in the ventilation ducting. (joints, end caps, take-offs, etc.) Checked with smoke with fan connected.
9. No leaks in the fan housing or where the fan connects to the duct. Checked with smoke.(Required)
9. No leaks in the fan housing or where the fan connects to the duct. Checked with smoke.
10. Airtight connection between floor vent duct and fan. Checked with smoke and ventilation in operation.(Required)
10. Airtight connection between floor vent duct and fan. Checked with smoke and ventilation in operation.
11. Airtight connection of floor slab and wall. (Not applicable to air inlets). Checked with smoke and ventilation in operation.(Required)
11. Airtight connection of floor slab and wall. (Not applicable to air inlets). Checked with smoke and ventilation in operation.
12. Filter fitted between the plinth and the wall at the air intake. Checked visually and possibly with smoke and ventilation in operation.(Required)
12. Filter fitted between the plinth and the wall at the air intake. Checked visually and possibly with smoke and ventilation in operation.
13. Air and watertight seal between ventilation duct and external facade. Visual inspection.(Required)
13. Air and watertight seal between ventilation duct and external facade. Visual inspection.
14. Fan and any damper settings are noted in the remarks, and that the damper is installed according to instructions on the damper (dimensional specifications).(Required)
14. Fan and any damper settings are noted in the remarks, and that the damper is installed according to instructions on the damper (dimensional specifications).
15. Airflow to the floor at all air inlets. Checked with smoke.(Required)
15. Airflow to the floor at all air inlets. Checked with smoke.
16. Pressure difference is measured across the floor at the air intake. A hose is lowered to the floor via the filter in the intake, furthest from the fan. The measured value and location are noted under "Remarks". (Approved value > 0.5 Pa).(Required)
16. Pressure difference is measured across the floor at the air intake. A hose is lowered to the floor via the filter in the intake, furthest from the fan. The measured value and location are noted under "Remarks". (Approved value > 0.5 Pa).
17. Measurement of total airflow from floor. Measurement method, measured airflow and floor area are noted under remarks. (less than 0.08 l/s/m2 floor area)(Required)
17. Measurement of total airflow from floor. Measurement method, measured airflow and floor area are noted under remarks. (less than 0.08 l/s/m2 floor area)
18. Alarm function fitted and checked.(Required)
18. Alarm function fitted and checked.
19. Operating instructions reviewed with the user (alarms, cleaning, filters, etc.).(Required)
19. Operating instructions reviewed with the user (alarms, cleaning, filters, etc.).
20. In naturally ventilated houses: With the smoke canister, check in all ducts, with the floor ventilation in operation, that the airflow does not reverse in the exhaust air ducts for general ventilation and flow into the house.(Required)
20. In naturally ventilated houses: With the smoke canister, check in all ducts, with the floor ventilation in operation, that the airflow does not reverse in the exhaust air ducts for general ventilation and flow into the house.
21. Marker tag to be sent after approved control plan and installed near the fan, location to be noted under remarks.(Required)
21. Marker tag to be sent after approved control plan and installed near the fan, location to be noted under remarks.

Follow Giha on Facebook!

Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.